Peer-reviewed journal aticles, conference proceedings, and book chapters.
- Abubakar, L., Jain, S., Ahlen, I. and Bhattacharjee, A., 2024. Turmeric-coated sustainable concrete with antibacterial properties. MRS Communications, pp.1-7.
- Choudhuri, D. and Lee, A., 2024. Ab initio molecular dynamics study of interactions between isolated polyhedral oligomeric silsesquioxane trisilanols and aluminum. Computational Materials Science, 239, p.112985.
- Hasan, M.M., Srinivasan, S.G. and Choudhuri, D., 2024. Transformation-and twinning-induced plasticity in phase-separated bcc Nb-Zr alloys: an atomistic study. Journal of Materials Science, 59(12), pp.4728-4747.
- Choudhuri, D. and Rinehart, A.J., 2024. Interaction between water and point defects inside volume-constrained α-quartz: An ab initio molecular dynamics study at 300 K. Journal of Applied Physics, 135(16).
- D. E. Moreno, C. Z. Hargather, "Thermodynamic properties as a function of temperature of AlMoNbV, NbTaTiV, NbTaTiZr, AlNbTaTiV, HfNbTaTiZr, and MoNbTaVW refractory high-entropy alloys from first-principles calculations", Solids, accepted, October 2023 [invited article].
- D. C. Purcell, M. J. Hargather, C. Z. Hargather, "Shear and combustion characterization of printable ammonium perchlorate composite propellant formulations", Propellants, Explosives, Pyrotechnics, accepted, September 2023.
- Simmons, J.D., Wang, S., Luhmann, A.J., Rinehart, A.J., Heath, J.E. and Majumdar, B.S., 2023. Paragenetic controls on CO2-fluid-rock interaction and weakening in a macroporous-dominated sandstone. Applied Geochemistry, 156, p.105744.
- N. B. Manz and P. A. Fuierer. "Mathematical Approach to Optimizing the Panchromatic Absorption of Natural Dye Combinations for Dye-Sensitized Solar Cells." Colorants 2.1 (2023): 90-110.
- Wilkinson, H., Boyd, B., O’Connell, J. M., Knox, R., Rinehart, A. J., Majumdar, B. S., & Choudhuri, D. (2023). Factors controlling heteroepitaxial phase formation at intermetallic-Al3Sc/liquid interfaces. Journal of Applied Physics, 133(12).
- Calvo, R. and Fuierer, P., 2023. Mechanical integrity of ceramic coatings on Kapton made by a dry aerosol deposition of lunar mare simulant. International Journal of Applied Ceramic Technology, 20(1), pp.395-409.
- S. Fuierer, N. Manz, M. Hargather, P. Fuierer, "Design of an Explosive Micro-particle Accelerator to Simulate Micrometeoroid Impacts in Space", Int'l J. Student Proj. Reporting, (in press) DOI: 10.1504/IJSPR.2023.10055828
[1] D. Choudhuri, B.S. Majumdar, H. Wilkinson, Investigation of in-liquid ordering mediated transformations in Al-Sc via ab initio molecular dynamics and unsupervised learning, Physical Review Materials 6(10) (2022) 103406.
[2] A. Simmons, A. Rinehart, P. Luhmann, P. Mozley, J. Heath, B.S. Majumdar, Using petrographically observable microstructure to predict hydromechanical changes in a complex siliciclastic storage site during CO2 injection, International Journal of Greenhouse Gas Control 119 (2022) 103724.
[3] C. Z. Hargather, J. M. O'Connell, "A systematic first-principles study of computational parameters affecting self-diffusion coefficients in FCC Ag, Cu, and Ni", Journal of Phase Equilibria and Diffusion, vol. 43, issue 6, (2022).
[4] Eshed, E., Choudhuri, D. and Osovski, S., (2022). “M7C3: The story of a misunderstood carbide”. Acta Materialia, p.117985.
[5] Shi, R., Choudhuri, D., Kashiwar, A., Dasari, S., Wang, Y., Banerjee, R. and Banerjee, D., (2022). α phase growth and branching in titanium alloys. Philosophical Magazine, 102(5), pp.389-412
[6] K. D Mojtabai, S. J. Lindholm, B. T McReynolds, N. Penners, J. D McCoy, S. Chowdhury, Y. Lee Diels–Alder Augmented Epoxies with Plasmonic Nanoparticle Fillers for Efficient Photothermal Depolymerization, ACS Appl. Polym. Mater. (2022), 4, 4, 2703–2711
[7] R. Calvo and P. Fuierer, “Mechanical integrity of ceramic coatings on Kapton made by a dry aerosol deposition of lunar mare simulant”, Int J Appl Ceram Technol. (2022);1–15, http://doi.org/10.1111/ijac.14235
[1] Ted E. Bunch, Malcolm A. LeCompte, A. Victor Adedeji, James H. Wittke, T. David Burleigh, Robert E. Hermes, Charles Mooney, Dale Batchelor, Wendy S. Wolbach, Joel Kathan, Gunther Kletetschka, Mark C.L. Patterson, Edward C. Swindel, Timothy Witwer, George A. Howard, Siddhartha Mitra, Christopher R. Moore, Kurt Langworthy, James P. Kennett, Allen West, Phillip J. Silvia, “Evidence that a 1650-BCE Tunguska-sized Airburst destroyed Tall el-Hammam, a Middle-Bronze-Age city in the Jordan Valley near the Dead Sea,” Scientific Reports (Sept- 2021), www.nature.com/articles/s41598-021-97778-3.
[2] K. N. Macowski, C. Z. Hargather, "A first-principles study of self-diffusion and dilute solute diffusion of Au in FCC Ag", Computational Materials Science, 193 (2021) 110414, Editor's Choice.
[3] J. D. Strother, C. Z. Hargather, "Statistical data set for first-principles calculations of stacking fault energies in an AlNbTaTiV high entropy alloy", Data in Brief, 34, (2021) 106670.
[4] C. Z. Hargather, Efficient first-principles methodologies for calculating stacking fault energy in FCC and BCC high-entropy alloys, Chapter in Book: Fundamentals of High Entropy Materials, Ed: J. Brechtl and P. K. Liaw, Springer, (2021).
[5] Choudhuri, D. and Blake, L., (2021). “Particle curvature effects on microstructural evolution during solid-state sintering: phenomenological insights from phase-field simulations”. Journal of Materials Science, 56(12), pp.7474-7493. (Article was a finalist for the prestigious Robert Wolfgang Cahn award)
[6] Choudhuri, D., Matteson, S. and Knox, R., (2021). “Nucleation of coupled body-centered- cubic and closed-packed structures in liquid Ni-Cr alloys”. Scripta Materialia, 199, p.113857.
[7] Choudhuri, D., (2021).“Local structure and bonding environment of intermetallic β1 precipitate phase nucleus in binary Mg-Nd”. Computational Materials Science,187, p.110111.
[1] G.K. Egert and T.D. Burleigh, “Improved Reproducibility of D2 Tool Steel after Cryo-Treating at -78°C (Dry Ice),” Materials & Corrosion Engineering Management (MACEM), 1 (1) (2020), 21-24. http://macej.com.my/1macem2020-21-24/
[2] J. S. Strother, C. Z. Hargather, “Stacking fault energies in quinary BCC high entropy alloys calculated using density functional theory, analyzed with inferential statistics”, Materialia, 14, (2020) 100927.
[3] Choudhuri, Deep and CampBell, Audrey, (2020). Interface dominated deformation mechanisms in two-phase fcc/B2 nanostructures: Nishiyama-Wasserman vs. Kurdjumov- Sachs interfaces. Computational Materials Science, 177, p.109577.
[4] Paranjape, Priya, Srinivasan, S.G. and Choudhuri, Deep, (2020). Correlation between bonding, vacancy migration mechanisms, and creep in model binary and ternary hcp-Mg solid solutions. Journal of Applied Physics, 128(14), p.145103.
[5] Choudhuri, Deep, and Majumdar, B.S., (2020). Structural changes during crystallization and vitrification of dilute FCC-based binary alloys. Materialia, 12, p.100816.
[6] Reynolds, C.R., Herl, Z., Ley, N.A., Choudhuri, D., Lloyd, J.T. and Young, M.L., (2020). Comparing CALPHAD predictions with high energy synchrotron radiation X-ray diffraction measurements during in situ annealing of Al0.3CoCrFeNi high entropy alloy. Materialia, 12, p.100784.
[7] K. Obi, L. Frolova, P. Fuierer, Preparation and performance of prickly pear (Opuntia phaeacantha) and mulberry (Morus rubra) dye-sensitized solar cells, Solar Energy, 208, 312-320 (2020). doi.org/10.1016/j.solener.2020.08.006
[8] P. Fuierer, R. Calvo, G. Strobel, “Dense, Nano-grained, Multi-Phase Ceramic Coatings by Dry Aerosol Deposition of Lunar Regolith Simulant”, Add. Manuf. 35 101304 (2020). http://doi.org/10.1016/j.addma.2020.101304
[9] B.S. Majumdar, I. Dutta, S. Bhassyvasantha, S. Das Mahapatra, Recent Advances in Mitigation of Whiskers from Electroplated Tin, J. of Metals 72(2) (2020) 906-917.
[10] M.V. McLeod, D. Bayer, Z. Turgut, A.K. Giri, B.S. Majumdar, Significant enhancement of magnetocaloric effect in a NiMnCuGa Heusler alloy through textural modification, J. Appl. Phys. 127(22) (2020) 11.
[11] Z. Wu, A.J. Luhmann, A.J. Rinehart, P.S. Mozley, T.A. Dewers, J.E. Heath, B.S. Majumdar, Chemo-mechanical Alterations Induced from CO2 Injection in Carbonate-Cemented Sandstone: An Experimental Study at 71 degrees C and 29 MPa, J. Geophys. Res.-Solid Earth 125(3) (2020) 25.
[12] S.V. Prasad, J.R. Michael, C.C. Battaile, B.S. Majumdar, P.G. Kotula, Tribology of single crystal nickel: Interplay of crystallography, microstructural evolution, and friction, Wear 458-459 (2020) 203320.
[13] C.S. Stevenson, J.G. Curro, J.D. McCoy, Gruneisen parameters of bead-spring chains: MD simulation and theory, J. Chem. Phys. 153, 244903 (2020).
[1] Choudhuri, D., Srivilliputhur G. Srinivasan, and Rajiv S. Mishra. "Deformation of lamellar FCC-B2 nanostructures containing Kurdjumov-Sachs interfaces: Relation between interfacial structure and plasticity." International Journal of Plasticity 125 (2020): 191-209.
[2] R. D. Rajapaaksha, P. A. Fuierer, M. I. Ranasinghe, “Colloidal CuZnInS3 nanocrystals as the sensitizer in photovoltaic solar cells”, Solar Energy 189 (2019) 503-509.
[3] Andrew W. Knight, Nikolai G. Kalugin, Eric Coker, Anastasia G. Ilgen
Water properties under nano-scale confinement. Scientific Reports (a Nature journal)
9, 8246 (2019) http://www.nature.com/articles/s41598-019-54000-9
[4] Lindsay Candelaria, Peter N. Kalugin, Brian M. Kowalski, Nikolai G. Kalugin, Covalent Epitope Decoration of Carbon Electrodes using Solid Phase Peptide Synthesis. Scientific Reports (a Nature journal) 9, 17805 (2019) http://www.nature.com/articles/s41598-019-44651-z
[5] Brian M Kowalski1, Noah Manz1, Donald Bethke, Eric A Shaner, Alexey Serov and Nikolai G Kalugin Role of humidity in oxidation of ultrathin GaSe. Mater. Res. Express 6, 085907 (2019) http://iopscience.iop.org/article/10.1088/2053-1591/ab1dd2/meta
[6] B.S. Majumdar, I. Dutta, S. Bhassyvasantha, and S. Das Mahapatra, ‘Recent Advances in the Mitigation of Whiskers from Electroplated Tin’, J. of Metals, Dec 2019; http://doi.org/10.1007/s11837-019-03933-7.
[7] J.D. McCoy, W.B. Ancipink, S.R. Maestas, L.R. Draelos, D.B. Devries, J.M. Kropka, Reactions
of DGEBA epoxy cured with diethanolamine: Isoconversional kinetics and implications
to network structure,
Thermochimica Acta 671149-160 (2019).
[8] G.K. Arechederra, J.D. McCoy, J.M. Kropka, Interplay between chemical and physical aging in diethanolamine cured diglycidyl ether of bisphenol-A (DGEBA) epoxy, Polymer 185, 121937 (2019).
[1] M.M. Schmitt, P.R. Bowden, B.C. Tappan, D. Henneke, Steady-state shock-driven reactions in mixtures of nano-sized aluminum and dilute hydrogen peroxide, J. Energ. Mater. 36(3) (2018) 266-277.
[2] K. Ring, P. Fuierer, Quasi-Equilibrium, Multifoil Platelets of Copper- and Titanium-Substituted Bismuth Vanadate, Bi2V0.9(Cu0.1-xTix)O5.5-delta, by Molten Salt Synthesis, Crystals 8(4) (2018) 13.
[3] C.Z. Hargather, S.L. Shang, Z.K. Liu, A comprehensive first-principles study of solute elements in dilute Ni alloys: Diffusion coefficients and their implications to tailor creep rate, Acta Mater. 157 (2018) 126-141.
[4] L. Candelaria, L.V. Frolova, B.M. Kowalski, K. Artyushkova, A. Serov, N.G. Kalugin, Surface-modified three-dimensional graphene nanosheets as a stationary phase for chromatographic separation of chiral drugs, Sci Rep 8 (2018) 10.
[5] S. Bhassyvasantha, N. Fredj, S.D. Mahapatra, W. Jennings, I. Dutta, B.S. Majumdar, Whisker Mitigation Mechanisms in Indium-Doped Tin Thin Films: Role of the Surface, Journal of Electronic Materials 47(10) (2018) 6229-6240.
[6] J. Adamczyk, P. Fuierer, Compressive stress in nano-crystalline titanium dioxide films by aerosol deposition, Surf. Coat. Technol. 350 (2018) 542-549.
[7] S. Khalifeh, T.D. Burleigh, Super-hydrophobic stearic acid layer formed on anodized high purified magnesium for improving corrosion resistance of bioabsorbable implants, J. Magnesium and Alloys 6 (2018) 327-336
[1] C.S. Stevenson, J.G. Curro, J.D. McCoy, The glass transition temperature of thin films: A molecular dynamics study for a bead-spring model, J. Chem. Phys. 146(20) (2017) 10.
[2] D. Miracle, B. Majumdar, K. Wertz, S. Gorsse, New strategies and tests to accelerate discovery and development of multi-principal element structural alloys, Scripta Materialia 127 (2017) 195-200.
[3] N.G. Kalugin, A.J. Roy, K. Artyushkova, A. Serov, Synthesis, characterization, and photoluminescence of Er2O3-Er2SO2 nanoparticles on reduced graphene oxide, Nanotechnology 28(19) (2017) 6.
[4] N.G. Kalugin, L. Jing, E.S. Morell, G.C. Dyer, L. Wickey, M. Ovezmyradov, A.D. Grine, M.C. Wanke, E.A. Shaner, C.N. Lau, L. Torres, M.V. Fistul, K.B. Efetov, Photoelectric polarization-sensitive broadband photoresponse from interface junction states in graphene, 2D Mater. 4(1) (2017) 12.
[5] K.H. Kaisar, C. Hofmeister, A. Pedigo, A.K. Giri, Y. Sohn, K.C. Cho, M. van den Bergh, B.S. Majumdar, Tensile properties and microstructure of a cryomilled nanograined Al-Mg alloy near the AA5083 composition, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 705 (2017) 239-248.
[6] S. Das Mahapatra, B.S. Majumdar, I. Dutta, S. Bhassyvasantha, Eliminating Whisker Growth by Indium Addition in Electroplated Sn on Copper Substrate, Journal of Electronic Materials 46(7) (2017) 4062-4075.
[7] G.K. Arechederra, L.R. Draelos, W.B. Ancipink, J.D. McCoy, J.M. Kropka, The insulating effect of the low thermal conductivity of epoxy on the resolution of the heat of reaction during polymerization by differential scanning calorimetry, Thermochim. Acta 656 (2017) 144-150.
[1] L. Meinshausen, S. Bhassyvasantha, B.S. Majumdar, I. Dutta, Influence of Indium Addition on Whisker Mitigation in Electroplated Tin Coatings on Copper Substrates, Journal of Electronic Materials 45(1) (2016) 791-801.
[2] J.D. McCoy, W.B. Ancipink, C.M. Clarkson, J.M. Kropka, M.C. Celina, N.H. Giron, L. Hailesilassie, N. Fredj, Cure mechanisms of diglycidyl ether of bisphenol A (DGEBA) epoxy with diethanolamine, Polymer 105 (2016) 243-254.
[3] J. Exner, M. Schubert, D. Hanft, T. Stocker, P. Fuierer, R. Moos, Tuning of the electrical conductivity of Sr(Ti,Fe)O-3 oxygen sensing films by aerosol co-deposition with Al2O3, Sens. Actuator B-Chem. 230 (2016) 427-433.
[4] C.M. Clarkson, J.D. McCoy, J.M. Kropka, Enthalpy recovery and its relation to shear response in an amine cured DGEBA epoxy, Polymer 94 (2016) 19-30.
[5] T.Q. Chen, B.S. Majumdar, Synthesis and reactivity of asymmetric bis(sulfonyl) imides, Main Group Chemistry 15(4) (2016) 375-382.
[6] S. Banerjee, I. Dutta, B.S. Majumdar, A molecular dynamics evaluation of the effect of dopant addition on grain boundary diffusion in tin: Implication for whisker growth, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 666 (2016) 191-198.
[7] I. Ayan, A. Fairbrother, P.A. Fuierer, Vertical orientation of short wires using a monolayer of spheres, Part. Sci. Technol. 34(6) (2016) 744-753.